





| Brand | Stovax |
| Model | Stovax Riva2 66 |
| Heat output nominal | 8.1kW |
| Output range | 5.5kW to 9.0kW depending on fuel load |
| Efficiency | 76.5% |
| ErP Energy Rating | A |
| Defra Approved | Yes |
| Fuel | Seasoned wood logs (less than 20% moisture content) |
| Airwash | Advanced Dualflow Airwash (top and bottom) |
| Air Controls | Two slider controls for primary / boost and secondary air |
| Construction | High quality steel exterior, cast iron grate, log guard and handle |
| Flue Outlet | Top only |
| Flue Diameter | 125mm / 5" |
| Grate Type | Flat cast Iron bed with ash pan |
| Guarantee | 5 years when registered with Stovax |
| Maximum Log Length | 450mm / 18" approx |
| Standard Colour | Traditional Matt Black |
| Optional Finishes | None |
| Options | 30mm Profil XS narrow 3-sided and 4-sided frames 54mm Profil wider 3-sided and 4-sided frames |
| Weight | 87.2kg |
| Air Vent Required | Yes (alternatively use DEAS) |
| Direct Air Inlet (DEAS) | Yes, 80mm dia rear or base, integrated and ready to add ducting |
| Suitable for 12mm hearth | No, must be sited on a 125mm constructional hearth when installed at floor level. Not needed if installed a minimum of 200mm above floor height |
| Overall Dimensions mm | Main body: H550 W650 D350 exc DEAS spigot |

Stovax Riva2 66 Inset Fire User Instructions
Stovax Riva2 66 Inset Fire Installation Instructions
See below the product video for the Stovax Riva2 66 Inset Fire