MI-Flash - No 6 Metal Grey SILICONE 127-230mm 304x304

The flexible design of Mi-Flash meets virtually all roofing needs. The flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. Easy on-site installation in usually 5 minutes. Sleeve flexibility accommodates vibration and pipe movement caused by expansion contraction. The soft aluminum base easily conforms to most metal roof profiles.

APPLICATION
Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C

CONSTRUCTION
Made of SILICONE, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.
The one piece construction allows for quick and easy on-site installation - usually taking no longer than five minutes.
The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

INSTALLATION
1. Choose pipe opening and trim using a stanley knife or scissors.
2. Slide flashing over pipe (you may need to lubricate the flashing with some grease).
3. Form the flashing to the same profile as the roof.
4. Apply sealant (contained in the Fixing Kit).
5. Fasten using the screws and caps (supplied in the Fixing Kit).

ONE Standard Fixing Kit is required to install this flashing.


 

Details
SKU 12-6HT
Item MI-Flash - No 6 Metal Grey SILICONE 127-230mm 304x304
Base Size Dia.: 304 x 304mm
Base Material:
Cone Material: Grey Silicone
Pipe External: 127-230mm
Roof Pitch: 0-18°
Temperature: 225°C Continuous - 260°C Intermittent
Dimensions


Technical

Twin Wall Pro Installation file

Install Guides

Sign up for our Newsletter