Opus Tempo 70
With integrated log store.
H250 W1440 D550
1000mm 6"/150mm Stainless pewter colour match flue.
500mm 6"/150mm Stainless pewter colour match flue.
250mm 6"/150mm Stainless pewter colour match flue.
45 degree bend 6"/150mm Stainless pewter colour match flue.
Cubic Tempo 70 5.0kW Wood Burner with Leg, Log Store, Pedestal, Bench and Wall Hung Options
For anyone looking for a 5.0kW with the biggest flame picture then the stylishly simple looking Cubic 70, at just under 700mm wide with its choice of configurations, should make an obvious choice. Underneath the Cubic 70's simple good looks is a state of the art EU Ecodesign-ready fire chamber engineered to deliver ultra low emissions which are a staggering 80% less than the strict standards set for Defra Approved status. Double baffles (which slow combustion gases so that more particulates burn off), pre-heated secondary and tertiary air and a vermiculite insulated firebox which can be precisely controlled all ensure that your Cubic 70 will be as clean burning as it is possible to be. Choose from the base model, with the Defra Approved option if you need it, which will work on a 12mm hearth, or if you want to create a bigger focal point then choose legs, log store, pedestal, bench or even wall hang it – it's really that simple to configure your own Cubic stove for maximum visual impact. The Cubic Tempo 70i inset and double-sided inset options are also available.
|Defra Approved||Optional SE version|
||Steel body/Cast door|
||Open grate with ash pan|
|Max Log Length
|Weight||Ask for details|
|Air Vent Required
||Not usually – subject to regulations|
|Suitable for 12mm hearth
||Yes – subject to regulations|
|Direct Air Inlet
||Yes (100mm left rear or left base)|
||Sides 500, Rear 200|
Overall Dimensions (mm)
70: H575 x W730 x D420
70F: H855 x W730 x D420
On Log Store: H975
On Pedestal: H1045
Bench Height: 250