Nordpeis Quadro 1T
Nordpeis Quadro 1T Wood Burning Corner Stove
The stylish Quadro 1T pedestal stove is exactly the same as the Quadro 1 version, except that it has been designed specifically to be installed in the corner of a room. In this type of installation it will provide you with a striking 180º view of the fire through its large seamless windows wrapped around the two front faces of the square fire chamber. For even stronger visual presence the Quadro 1T has an additional top box option to increase its height by a further 216mm making it 1421mm (approx 4'9") tall.
Made in Norway and constructed with premium quality steel plate and cast iron, the Quadro 1T also features a highly effective Thermotte® refractory panelled firebox which is proven to increase efficiency (80.4%), promote cleaner burning and ensure a much cleaner looking fire chamber when compared to other linings. The contemporary styling detail is kept to an absolute minimum on the Quadro with a discreet flush door handle and unobtrusive single control to precisely manage the combustion air. The fire chamber will take logs up to 300mm (12") long to produce a variable heat output range between 3kW – 8kW (with a nominal of 6.2kW) depending on the fuel load and which will be more than enough for most medium to large sized contemporary living spaces.
The Quadro 1T is suitable for use on a 12mm hearth and its stylish base also has concealed adjustable feet for uneven hearths or non-combustible floors. Optional direct air supply (DEAS) and Defra smoke exempt kits are both available. In our opinion the Nordpeis Quadro 1T corner stove makes a wonderfully attractive alternative to a typical cylindrical corner stove.
NB Although the Quadro 1 is listed by Hetas as SIA Ecodesign Ready, the Quadro 1T version, despite having exactly the same fire chamber and clean burn combustion technology, has not yet been officially listed (however, we expect this to change).
|Output Range||3.0 – 8.0kW|
|Air Controls||Single slide control (primary & secondary)|
|Construction||Steel & Cast iron|
||Top or Rear|
||Solid Thermotte® Refactory Panel|
|Max. Log Length
||Up to 30cm/12”|
|Air Vent Required
||Yes – or use DEAS|
|Direct Air Inlet (DEAS)
||Rear or base (optional kit)|
Overall Dimensions (mm) H14201 W545 D440
Combustible Distances Sides 400mm Rear 200mm